Why should you preserve a perfectly Good Runway?

Garfield County Regional Airport (RIL):
How a Pro-active Pavement Maintenance Strategy is saving this airport millions!

The Need for a Pro-active Strategy:
"In mountainous areas subject to extreme weather conditions, asphalt will fail after only 12 years, even if a runway was initially designed to structurally hold for 20 years."
–William VanHercke, Manager, Aviation Services, CH2M HILL's Northwest Mountain Region

“Research shows that if airports maintain asphalt pavement every three to five years, they can get more than 20 years out of a runway – if not 30.” –Joel Harry, Airfield Civil Engineer, Project Manager, CH2M HILL

"We (had) an absolutely perfect runway So, one month after it was finished, we completed a 20-year maintenance plan to make sure it stayed in that same condition."
–RIL Airport Director, Brian Condie

The Plan (Get Ahead of Deterioration Cycles):
Historically, RIL was forced to shut down each year for several days while the pavement surface was closely inspected and every crack sealed. This was a terrible inconvenience and loss of revenue for the airport and the whole community. Plus, Some RIL's runway pavement and joints were showing signs of premature raveling–only 3 short years after the runway was refurbished.
 
But, instead of waiting five years before taking steps to maintain their Good Condition runway, RIL developed a pro-active maintenance strategy to postpone a full resurfacing.

GSB Is the Solution:
RIL sought the advice of Asphalt Systems to determine the best long-term maintenance strategy while keeping the runway looking and performing like brand new. Together, it was decided GSB was the best solution.

GSB-88, made from a natural black bitumen, contains a rejuvenating agent that penetrates into the matrix providing long-term protection, while keeping the pavement pliable and flexible. And, because GSB is made from a long-chain hydrocarbon, it is extremely resistant to moisture and ultraviolet rays–preventing UV rays from breaking down vital oils.

GSB Is a Budget-saver!
Because the project came in around $300,000 (vs. the originally anticipated $470,000), RIL was able to carry over the airport's entitlement funds for use on a bigger project the following year.

But the money saving doesn’t stop there.
“By performing prompt preventative maintenance every few years, the airport expects to spend $1.5 million over 25 years vs. an estimated $6 million to resurface the runway twice."–William VanHercke, Manager, Aviation Services, CH2M HILL's Northwest Mountain Region

That’s over 3x in savings!!!

3 years after application, the GSB-treated surface remains in “like new” condition and performance! Now that’s a Win-Win result!

Plus, the New FAA P-608 Specification calls for Gilsonite Modified Asphalt Emulsion (GSB) to be used on all airfield pavements, including runways and high-speed taxiways! Start saving money and sustain the look and performance of your runway!
Contact us today!
--------------------------

Full quotes and related article:
Airport Improvement Magazine http://www.airportimprovement.com/content/story.php?article=00516

New FAA P-608 Specification Calls for Emulsified Asphalt Seal Coat

Proven on 400+ airfields and 300+ runways nationwide, GSB-88® qualifies for AIP funds! 

The recently published Federal Aviation Administration’s revised Advisory Circular contains new and revised “P” Specs. One of the new additions is P-608 Emulsified Asphalt Seal Coat which calls
for Gilsonite Modified Asphalt Emulsion to be used on ALL airfield pavements, including runways and high-speed taxiways. Although P-608 is a new FAA specification, Gilsonite Modified Asphalt Emulsions have been used as highly effective airfield pavement preservation tools for 40+ years.

Gilsonite is Green Circle Certified and fully compatible with bitumen. As a resin, can be melted into hot bitumen, added during the hot-mix manufacturing  process, or blended into a preservation treatment as a uniform, easily workable product with minimal downtime.

Better than a typical sealer that sticks on top and wears away while allowing damage to weaken runway binders, GSB® penetrates through and becomes part of the surface creating a superior barrier against the elements, fuel spillage, and breakdown during daily use. Grooved runways need not be re-grooved, nor are PFC (porous friction course) asphalt surfaces altered.  

Gee Asphalt Systems, Inc.
    •    Family Owned and Operated.
    •    Recognized & Trusted Nationwide.
    •    Long-established Industry Leaders.
    •    Leaders in Advancing Preservation Strategies.
    •    Our skilled team of technicians and craftsmen have a combined experience of 150+ years.

As one of approximately 65 GSB® dealers in the United States, Gee Asphalt is the ONLY GSB® applicator with 41+ years of continuous experience traveling to projects nationwide. Let us show you how you can sustain your runways AND save money!

Diverse Research Proves the Benefits of Preservation

As a family business, here at Gee, we have been conducting research on preservation products for close to 50 yrs and counting. But, as we all have observed firsthand, the asphalt industry has changed while costs have risen--and roads just don’t last as long as they used to. And, in response and under the mandate of reducing costs and sustaining vital infrastructure, many other entities (only some are listed above) have done independent research with all the same results:

The use of Preservation products can extend 2x the life of pavements and reduce overall maintenance costs.

But this research isn’t just filed away, it’s put into practice!

 While most of California’s highways are more than half a century old, they carry nearly half of the nation’s container freight. Recently the California Transportation Commission (Caltrans) initiated a “Fix It First” campaign, which includes preserving pavements that are in good condition from deteriorating. 

Caltrans Director Malcolm Dougherty reasons, “To get the most bang for the buck for taxpayers, Caltrans targets dollars where they are most effective--pavement preservation. Every $1 spent on preventive pavement maintenance saves Californians $11 that would have been spent on expensive pavement repairs.”
(Source: Central Valley Business Times / Sacramento, CA June 26th, 2014

)

Time and time again, test after test, pavements in Good Condition when treated with GSB, result in a  binder with unmatched strength–durability and bonding properties with high density–capable of preserving vital oils and flexibility in the pavement for decades of trouble free pavements and prolonged traffic load carrying capabilities! Contact us today and let us show you how we are preserving today’s infrastructure for future generations.

Our NEW Gee Overview Video!

Asphalt Preservation with Gee Asphalt Systems, Inc






Introducing a quick video all about Gee's proud history, mission, and the cost-saving benefits of using GSB to extend the life of your pavements.

Check our YouTube Channel to see examples of our processes and workmanship.

Are You Wasting Money on Crack Sealant?

“Nearly every surface defect started as a crack that got out of control. Each phase the remedy gets more expensive than the last. We’re here to break that cycle and to take care of your good pavements before it’s too late!” – Gee Asphalt Systems, Inc.

Did your crack sealant make it through the winter?

Last fall, many pavement owners spent good money fixing pavement cracks, but as the snow melted many failed fixes were revealed. 


But why did your crack sealant fail so quickly in the first place?

In most cases, the technique used to fill the cracks was substandard.


(Common) Blow & Go – (Not recommended):
Quick and cheap but least effective. Debris / dirt is blown and cracks filled leaving most of the sealant on top 
– vulnerable to being pulled out and scraped off – leaving your pavement further exposed to the elements, traffic and plows, and pedestrians during everyday use. And, once moisture follows down through the cracks and enters a pavement’s base and support structure, the rate of deterioration and damage and cost to repair will accelerate significantly unless you act quickly.



In addition, the sealant that does make it down into the crack has gritty, rough, unprepared surfaces which do not promote optimum bonding surfaces. Either way, sealant will need fixed a lot sooner than you think!

VS

Rout & Flush Pour – (We recommend):
Quality sealant (Hot applied ASTM 3405 rubberized sealant; proven superior bonding properties, high resiliency – up to 300%, and great cold weather performance) is carefully placed into the routed, dried and prepared crack, filling up from the bottom, until flush with the surface. Voids and bubbles that can shorten the life of the crack seal are eliminated while also preventing most surface damage. This technique also yields and longest “like new” look and attractive appearance.

OR

Rout & Overband – (We recommend for failed repairs):

Effective for crack sealing previously sealed cracks that cannot be routed. Sealant is carefully placed into the dried and prepared crack, filling up from the bottom, and squeegeeing the sealant flush with the surface. This minimizes most damage from traffic, plows, and pedestrians but is less attractive than the Rout & Flush Pour technique.

For best, longer lasting results choose a trusted / knowledgeable expert installer!
It may look like a budget-saver, but as the old adage goes, “You get what you pay for.” You can risk hiring cheaper contractors but if they are not specifically trained in crack sealing, you will have to repeat the process again sooner, wasting your valuable time and money. Choosing a trusted/knowledgeable installer who will use quality products and the right equipment is key to to the long-term performance of any crack seal. We utilize state-of-the-art double jacketed melters designed to safely melt sealant, gently agitate, and then pump it through insulated hoses and specially designed applicators into cracks. We also equip our machines with self contained compressors to blow out oil free compressed air to better prepare cracks for sealant. When properly installed, hot applied crack sealants will last for years to come, protecting your pavement investment. Crack sealing is just one of several integral components in an overall preservation strategy.

New Branch Office Opens Near Chicago

Thanks to all our clients who are enjoying the benefits and overall cost-savings by preserving their asphalt pavements with us!

Now, just in time for the 2014 working season, we proudly announce the opening of our Chicagoland branch office in Somonauk, IL.

At our new branch office, you can expect the same great Gee quality, pride, and service you have come to expect from us...just now a little closer to you!

Top New Years Resolutions for Pavement Maintenance

“GSB-88® Sealer Binder cost about 8x less than the cost of applying new asphalt.”
--Matt Hawks, General Manager, White Cloud Casino

“Thank-you for introducing us to a cost-effective and efficient product (GSB-88®)! All airfield users agree it is a great improvement rejuvenating a deteriorated taxiway into an almost new system.”

--Shaun Germolus, Director of Operations, Duluth International Airport

"Analysis shows GSB-88® yields a Savings-To-Investment Ratio (SIR) Of 5.0 and a Return On Investment (ROI) of 400%."

--GSB-88 NAVFAC Performance Report

“$1 spent today on pavement preservation reduces future replacement costs up to $10.80”


– Jim Sorensen, Director Pavement Preservation, FHWA

“Our parking lot was showing signs of deterioration. We needed to improve the appearance and safety. Replacement with new asphalt was going to be costly. We could replace it OR, preserve it by sealing the cracks and applying GSB®. We agreed to have Gee Asphalt Systems provide the pavement preservation services...and are very pleased.

--Matt Hawks, General Manager, White Cloud Casino



“GSB-88® is engineered to significantly retard surface oxidation by rebinding the surface aggregate and protect the pavement binder from the natural surface oxidation process. Surface oxidation is far and away the greatest deteriorating factor on the majority of DOD airfields.”

--DOD Comprehensive Evaluation of GSB-88® Sealer Binder


“Thank you for your assistance in providing a solution to our problem...The untreated test section showed extreme raveling with excessive loose aggregate and a very porous surface. The subsequent test application of GSB® has corrected this problem and has no doubt prolonged the life of this surface. It is evident the surface would have to have been replaced if not for the GSB® application.”
--Tom McCarthy, Operations Manager, Northpark Mall



“We are very satisfied with GSB® and over the years of wear and tear it has held up tremendously well. We have used other products over the years but they do not compare to the quality of the GSB® application.”

--Eugene Oakey, Director of Facilities, May Centers, Inc.



“Gee Asphalt showed me pavements where GSB® had been used from as little as 1 year ago, up to pavements maintained as long as 32 years, and they all looked amazing!”

--Brent Stansbury, Facility Engineer, Gateway, Inc.



“We wanted to try something besides the ss1h asphalt emulsions to keep aggregates bound in place on the shoulders, prevent raveling, and keep newly placed asphalt in a "like new" condition. We tried GSB-88®. Years later aggregates were still bound tightly in place...GSB-88® was applied to asphalt overlay projects having ADT (average daily traffic) ranging from 300-2600 vehicles. We will continue using GSB-88® for our asphalt preservation applications.”

--Allen Horak, District Maintenance Superintendent, Nebraska Department of Roads

 “I can’t say enough about Gee Asphalt, their professionalism, polite and courteous staff and customer satisfaction. They talk the talk and walk the walk! You continue to be a true pleasure to work with. Gee Asphalt has become an awesome partner in Asphalt Preservation!" 

--Scott Mallicoat, District Maintenance Supervisor, Farmington Schools

“Gee got the job done right!...Working with a company that gets the job done right the first time with little supervision is great! I look forward to working with Gee Asphalt in the future.”

--Les Lawson, Iowa State University, Facilities Planning & Management Campus Services

“From the salesperson to receptionist, owner to crew, these top-notch professionals exceeded our expectations with their fast and efficient, high quality work. Knowledgeable and courteous describes their staff and crew. I would highly recommend them.”

--Ms. Angie Ellison, Engineering Technician, City of Eagan Minnesota

“Everyone at Gee Asphalt Systems, from the owner to office staff to field crews, are professional and act with integrity.  They understand our shopping center clients and work diligently to minimize customer inconvenience."

--Thomas R. Zimmer, PE, Principal, Zimmer Consultants, Ltd

Make Gee part of your New Year's Resolution and improve the health of your pavements today!
 

Is your ice prevention strategy GOOD for your assets?

Every year building and pavement owners discover thousands of dollars in property damage after the snow and ice thaw.

Don’t let this be you. Use the right product for the right job! 

Unlike in other de-icers, Caliber does not contain abrasive elements so replacement, cleanup or repair becomes virtually non-existent.

Liquid de-icers enhanced with Caliber are environmentally friendly to pedestrians and vegetation (including delicate landscaping) and are less corrosive to concrete and concrete parking structures, and will not damage your expensive floors and carpeting. Many of our customers have indicated their reduced floor care costs single-handedly paid for the switch over to liquid de-icers!

And, Caliber is more powerful than other de-icers, so less is needed to yield the same or even better melting performance. This means for a lower overall cost, Caliber gives you more melting and staying power than nearly anything else on the market today.


See more info at:
geeasphalt.com/#!ice-prevention-products-and-services/c3

For a complete product list see: 
geeasphalt.com/#!ice-prevention-helpful-links/c1c2x

Find the best Ice Prevention solutions for Your needs!

Premium Quality De-icers / Official Authorized Distributors

Historically, pavement owner’s have reacted post-storm, allowing snowfall to accumulate and ice bonds to form, and then start the expensive and arduous process of clean up and removal–often taking days to complete, shutting down access for unbearable amounts of time.

But, now there is a better proactive way to combat the unpredictable winter months: Anti-icing 

Applying an anti-icing treatment with liquid de-icer before the storm helps impede the formation of ice bonds during the storm. As temperatures fluctuate, treatments remain on the surface and continue to work. Studies have proven using de-icers can reduce removal effort by up to 10 to 1! 

Sometimes the intensity of storms catch us off-guard. De-icers, also, specifically Meltdown Absolute Zero, can act as a “bond breaker” after ice bonds have formed.

 “Previously we used calcium chloride for our frost runs. This will be our fourth season using Caliber M1000. We like the performance and the residual between applications. I continue to use Caliber because it helps me sleep at night."
    –Kurt Bailey, County Engineer, Polk County Iowa 

“The use of MeltDown Liquid has allowed us to save $25,000.00 per year and eliminated the process of stripping and re-waxing floors every spring. This savings alone was large enough to cover the entire cost of our de-icer purchases for the entire winter season!”
    –Tom Pederson, Director of Operations, The Empire Mall

Here at Gee, because we care about working with you for the long haul, we strive to represent our products and services with accuracy and honesty. If we wouldn’t use it, we don’t sell it!