Showing posts with label GSB-88. Show all posts
Showing posts with label GSB-88. Show all posts

Monday, December 21, 2015

Are reoccurring repairs a Budget Nightmare for 2016?

What’s on your Budget for the New Year? 

Are some of the same patches and fixes expected on your Budget again in 2016? If you are this pavement owner, just like last year and several years before that, this ugly repair is now a permanent line in the Budget. 

Plus, besides the cost of the materials, this downhill narrow stretch without shoulders creates potential safety hazards for both motorists forced to a stop and workers out on the road during the duration of the repair…YEAR AFTER YEAR.

Had a more proactive approach been taken—before the tale-tale signs of pavement decay—with a sound Asphalt Preservation strategy, this repair wouldn’t be a reoccurring nightmare. 

Being Pro-active with a sound Asphalt Preservation Strategy saves A LOT of money!
With proven cost savings—up to $10.80 for every $1 spent on Asphalt Preservation, just how much money is being wasted on reoccurring repair YEAR AFTER YEAR?

Thursday, November 12, 2015

Why preserve a parking lot 1 yr after installation?

The bottom line:  IT SAVES MONEY!
Proven:
FHWA, FAA, NAVFAC, MDOT, and AZDOT data all conclude, for $1 spent on Asphalt Preservation, up to $11 is saved by reducing replacement costs and extending pavement life.

Why does it work?
Preventing asphalt binder oxidation is a "first priority" and is critical to pavement longevity. According to FHWA research data, up to 80% of pavement flexibility is lost during the first 5 years. In other words, your pavements’ vital oils, essential for high performance, escape at a rapid pace and contribute to the Condition of your pavement.

While pavements in Good Condition, may perform well, you can sustain your lots in New Condition well before pavements begin to show signs of age and oxidation.
GSB-88 ® (Gilsonite Sealer Binder), seals and traps all the New Oils present during manufacture deep inside that maintain, pliability, ductility, and flexibility—and keep the damaging weather and elements locked OUT of your binder.

Like the way butter seeps down into bread, GSB®’s unique molecular properties create a durable seal that not only keep aggregates tightly glued together, but penetrate down to become part of the matrix itself. The outcome is a binder with unmatched strength–durability and bonding properties with high density.

Original pavement performance, in this case, NEW CONDITION, is preserved for decades of trouble free pavements and load carrying capabilities!...and YOU SAVE MONEY!

A Healthy Outside Starts From the Inside!
Preserve the binder and maintain high pavement performance while doubling the life of your parking lots!

This is a different way of thinking about the health of your pavements. Rather than being REACTIVE to what happens to your asphalt and throwing a lot of money at repairs, this is a process of being PROACTIVE and protecting one of your most expensive assets!

Let us show you how to sustain your parking lots with GSB-88® as part of a sound Asphalt Preservation Maintenance Strategy! Contact Us Today!


Thursday, July 16, 2015

GSB-88 ® Featured in the News

Crews are applying a product called GSB-88 ®, which “penetrates the asphalt and fills in all those voids,” said Jeremy Noel, the department’s streets and sewers manager. If not filled, potholes could lead to bigger problems that Noel is trying to avoid.
“We are proactive in trying to extend the lives of our pavements,”
Noel said.
One application of GSB-88 can last up to 10 years and delay expensive resurfacing projects.

Council Bluffs resident Bill Grove said he is happy about the possible solution.“Makes sense to me to try something new,” he said. “It’s going to be a lot less expensive than putting two more inches of asphalt on it.”

Noel said he knows the department has a lot of work to do. In the meantime, he is asking motorists to be patient while crews finish the job.

“It’s an inconvenience for a little while, but it’s worth it in the end,” he said. Council Bluffs road officials plan to test another product on the roads later this summer to see which will work best in the long run.

Click here
for video.

Sunday, June 21, 2015

GSB-88® received 4th GreenCircle® Certification!

We’ve all heard in the news the increasing scrutiny and even some lawsuits over health-food claims and misleading ingredients.

You may also be skeptical about new sealcoat products and their claims...but GSB-88® is not just another sealcoat! Gilsonite Sealer Binder comes from Gilsonite, a unique natural hydrocarbon high in asphaltenes and nitrogen compounds–completely unrefined; nothing taken out or added. And, GSB-88® can be tested with quantifiable and predictable results!

Just recently GSB-88® was submitted to the rigorous and Internationally accepted Life Cycle Assessment (LCA) conducted by 3rd party testing & analysis.

We proudly announce, on behalf of our distributor ASI, GSB-88® has received GreenCircle® Certification for the 4th consecutive year! GSB-88® received high scores in all categories, and GSB-88® remains the only product in its category to be recognized.

If utilized globally, GSB-88® could save 1.2 million metric tons of CO2 emissions per year and billions of dollars in savings!

Click here to see the certificate here.

Thursday, May 28, 2015

GSB-88® Saves Money / Improves Safety in Parking Lots!

While thousands of people slip and fall in parking lots each year, statistics have shown that most parking lot accidents are the result of slippery conditions in poorly maintained parking lots during the winter. And any other time during the year, very rarely does the average patron talking on their mobile device or carrying oversized packages–otherwise distracted–consider the safety of the pavement they are walking on. No matter the size, every inch of your parking lot needs to be carefully maintained because patrons walk over every part of it!

This is of the utmost importance, because, you, the parking lot owner could be held liable in court if an injury was caused by damaged/aging pavement, potholes, or crumbling curbs. In other words, if you are found to be negligent because your lot wasn’t kept properly safe you could be shelling out thousands of dollars in claims!

You have a few options when it comes to effective parking lot maintenance. You can wait until you see some raveling or cracks in the pavement and apply a fix that may only last a season–or you can get ahead of the damage with a pro-active Asphalt Preservation Strategy with GSB-88®. 



Because GSB-88® is not a typical coating, it’s unique regenerative properties allow the product to penetrate through and become part of the surface of asphalt pavement while preserving and strengthening the binder. Any deterioration your pavement may have been experiencing will be halted and the lot will actually retain the black “like-new” appearance.

Plus, applications of GSB-88® are quick-curing and require little downtime and last 2x as long as other processes–getting patrons back into your business a lot faster with fewer headaches.

GSB-88® saves you money and improves safety. Give us call and we’ll show you the difference!

Sunday, March 22, 2015

Road Maintenance: We need to change our thinking–NOW.

Not just up to Congress to fix:
In the news, the ASCE graded our 4+ million miles of public roadways a “D” and ranked us 16th in the world! They concluded:




Plus, our economy is impacted as freight is slowed down, diverted, impeded on the way to ports, railways, and city centers—and the cost is passed down to the consumer.

This is making news alongside our almost bankrupt Federal Highway Trust Fund.
But, ear-marking more money and resources to reconstruct a lot of failing roads now just means the cycle will repeat itself in 20 years–and be even more expensive and dire.

This isn’t a problem that has crept up on us overnight.
The snowball has been forming as regular maintenance initiatives have been put on the back-burner. Especially repairing minor surface defects, that don’t seem to impact the average traveler and are expected even as roads age, are often perceived as unnecessary and even wasteful spending by states, counties, and municipalities.

We’ve been building roads the same way for 50 years:
The traditional way we think about the life of a road is adding to the problem. Even today, we build a road based on a 20 yr life-cycle, leave it alone for a number of years “because it looks and performs Good”, and then act when the damage is clearly visible with varying degrees of fixes; patches, crack-sealing, overlays—often determined by what’s available in the budget and not what’s best for the health of the road.

One significant problem:
By the time the damage IS seen, over time, the binder strength has already been compromised.

The “fix” does not work:
  • It does NOT improve binder health
  • It uses a lot of resources for little gain
In other-words, It does NOT significantly extend the life of the road.
Also, since the lion’s share of the road maintenance budget went towards trying to fix Poor Condition roads, little if any is left to maintain Good Condition roads.

A better way—We MUST Maintain Good Condition Roads:

Asphalt Preservation with GSB-88:
  • Penetrates into the pavement matrix; becomes part of the surface of asphalt, sealing and binding aggregates tightly together.
  • Halts surface oxidation/weathering
  • Lasts 2x as long as other products/extends pavement life
  • Saves 10x over the Cost of 1 Asphalt Overlay!
The Future Impact:

We need take responsibility NOW-road by road-at the local, county, state, and federal level, and do our part to ensure a sustainable infrastructure for our children.

If all Good Condition roads were maintained and preserved on a regular schedule not only would there be significant cost-savings, but road life would be extended 20-30, even 40+ yrs!

Sound too good to be true? We have pavements that have been in service for 42+ yrs! Let us show you how you can create sustainable roads. Contact us today!

Monday, February 16, 2015

FAA revised "P" Specifications Listing

The recently published Federal Aviation Administration’s revised Advisory Circular contains new and revised “P” Specs.

They are as follows:


P-608

Emulsified Asphalt Seal Coat
Recommended Use:
For ALL airfield pavements – including runways, low speed taxiways, shoulders, overruns, roads, parking areas. For maximum benefit, apply to new asphalt pavement and pavements in fair or better condition.

P-609
Bituminous Surface Treatments

Recommended Use:
For airports serving small airplanes 12,500lbs (5670 kg) or less.
Not recommended for routine turbo-prop and jet engine aircraft.
Warning: May leave excessive amounts of loose aggregate on pavement surface. Only recommended for pavements other than airfield pavements.
* Use on overruns, roads, and other general applications.

P-626
Emulsified Asphalt Slurry Seal Surface Treatment

Recommended Use:
For airports serving small airplanes 12,500lbs (5670 kg) or less, some 60,000lbs (27216 kg) or less exceptions.

P-629
Thermoplastic Coal Tar Emulsion Surface Treatments

&
P-630
Refined Coal Tar Emulsion w/out Additives, Slurry Seal Surface Treatment

&
P-631
Refined Coal Tar Emulsion With Additives, Slurry Seal Surface Treatment

Recommended Use:
For airports serving small airplanes 12,500lbs (5670 kg) or less, some 60,000lbs (27216 kg) or less exceptions.
Warning: Many states and local authorities prohibit the use of coal tar products with environmental/safety regulations. 

P-632

Bituminous Pavement Rejuvenation (Reclamite)

Recommended Use:
For airports serving small airplanes 12,500lbs (5670 kg) or less.
*Use on pavements other than airfield pavements.
Note: the term “rejuvenation product” carries the same connotation as the term “rejuvenator” or “rejuvenator/sealer.”

Monday, January 5, 2015

Sustainability and the case for Pavement Preservation


(adapted from ASI research)
All of us in the pavement industry are ultimately responsible for how to best sustain our pavements. 



FACT
  • There is an enormous amount of pavement in the world, and the quantity is growing every year;
  • Economically & environmentally, it is infinitely cheaper & better for the planet to maintain pavement than to replace it;
  • Some methods of pavement preservation are much “greener” and therefore more sustainable than others;
  • To move forward sustainably on local and global levels, asphalt pavement simply must be preserved wisely.

World Pavement Numbers

There are nearly 3-million miles of paved roads in the U.S. alone - enough to circle the earth 120x at the equator. Total U.S. farmland is approximately 80,000 square miles, while pavement (including parking lots and airfields) is approximately 61,000 square miles. China and India are close behind and growing quickly; globally, we will soon exceed 12-million miles of paved roads. Each additional car requires an average of .18 paved acres (road & parking), meaning that 5 cars require an additional football field of pavement.



The reality is that pavements pose a sustainability challenge. Their construction and maintenance consumes large quantities of non-renewable materials, while also creating significant energy and environmental impacts. In the U.S. alone, over 350 million tons of raw materials go into the construction, rehabilitation, and maintenance of pavements annually.

Maintenance Considerations


“Environmentally friendly” can often mean “more expensive,” but that is not the case with pavement preservation options. Economically, over a pavement’s 20-30 year lifespan, it is 10x cheaper to maintain existing asphalt than to replace it. And environmentally, enormous resources are saved: studies have shown that if all pavements were properly maintained rather than repaved, global CO2 emissions could be reduced by over 1 billion metric tons per year, which equals an annual 3% reduction in global greenhouse gas emissions.

Naturally, some pavement preservation products are “greener” and therefore more sustainable than others. Water-based emulsions are widely recognized as a better environmental choice than fuel-based cutbacks. GSB-88® sealer/binder/rejuvenator emulsion represents a very economical, versatile, and environmentally friendly option – plus it is the only industry product to receive an Environmental Product Declaration as well as Green Circle Certification.

Even larger sustainability differences can be found in various pavement preservation methods, shown in the chart below.

Annualized Energy Consumption & Greenhouse Gas (GHG) Emissions per Type of Treatment:




Sustainability is an economic and environmental priority in today’s world, and proper asphalt preservation represents a significant part of it. Asphalt pavement comprises nearly 2% of the earth’s surface, and preserving it wisely can save billions of dollars every year while also reducing annual global greenhouse emissions up to 3%. Affordable and resource-friendly solutions are readily available; utilizing these products and processes properly will help achieve the decoupling of economic growth and environmental decline, and thereby move the planet forward more sustainably.

(full article and research references can be viewed at http://www.asphaltsystemsinc.com/blog/item/sustainability-and-pavement-preservation)

Friday, May 16, 2014

GSB® Extends Pavement Life, and Our Customers are Saving REAL Money!

Proven by FHWA, FAA, NAVFAC, MDOT, and AZDOT research:
GSB® Asphalt Preservation Treatments can Save 10x over the Cost of 1 Asphalt Overlay!

The reality of the overwhelming costs of relying on a Worst-First Maintenance Strategy has left 60% of Jones County roads close to the end of their life-cycle. As in many counties, facing steep reconstruction costs and budget shortfalls, many engineers and decision-makers are looking for a better, more cost-effective strategy. See how GSB® was the strategy of choice for extending the roads of Jones County.

https://www.youtube.com/watch?v=anIah3jljYA

Derek Snead, P.E., Jones County Engineer.
"I’ve been working with the county for about 2 1/2 years now. We’re trying our best to keep up with the roads as best we can with the money we’ve got. Well, we have an extensive pavement system here in the county, about 150 miles of paved roads. Of those 150 miles, a chunk of them, over 60% are getting closes to the end of their life.

We obviously don’t have the funds to repair all the roads we want to. GSB® (Gilsonite Sealer Binder® Preservation Treatment) was one solution we looked at to try to offset some of the replacement (cost) with extending the life of some of our paved roads here in the county.

It (GSB®) was a very easy process. We did the project under traffic. It didn’t take very much time. (We found) GSB® penetrates deep into the existing pavement. That creates a flexible pavement which is what it was initially intended to be. It (GSB®) gets down deep into the pavement as opposed to just on the surface--it gets down into it and makes the whole thing flexible and kind of work together. Typically when we do sealants they’re more for cracks and the surrounding areas. This GSB® is more of a broader (application). It goes over the entire area. It protects from future cracks that aren’t maybe existing quite yet or are very small.

It (GSB®) seemed to to do the job it said it was going to do so far. So far, we are very happy with the product."

Friday, April 18, 2014

Our NEW Gee Overview Video!

Asphalt Preservation with Gee Asphalt Systems, Inc






Introducing a quick video all about Gee's proud history, mission, and the cost-saving benefits of using GSB to extend the life of your pavements.

Check our YouTube Channel to see examples of our processes and workmanship.

Friday, March 7, 2014

The Pothole Epidemic


Freeze-thaw-moisture, freeze-thaw-moisture, freeze-thaw-moisture.
 

All across the nation, communities are dealing with an epidemic of potholes, possibly anticipated in aging streets, but also showing up in poorer quality repairs that just didn’t hold up under extreme winter conditions.

“Still, that (potholes) wouldn't be as big a problem had the nation invested more up front,” says Larry Galehouse, Engineer and Director of the National Center for Pavement Preservation.

"What people have to understand is you can't have a pothole without first having a crack in the pavement surface. Agencies have been cash-strapped for a number of years, and now it's all coming home to roost."

"If you've got a pavement in poor condition that's got a lot of alligator cracking ... where water is getting into the pavement and freezing and thawing, it's going to break up the structure," says Kevin J. Haas, Traffic Investigations Engineer, Oregon Department of Transportation, Salem. 



And to add weight to their statements, it’s no coincidence the American Society of Civil Engineers gave America's infrastructure (roads) a D last year.

And, now communities following Worst First Maintenance Strategies are just trying to keep up with the repairs and pay for it any way they can.

In New York City, 136,476 potholes have been patched since Jan. 1. — compared to the just under 57,000 by Jan 1 in 2013.

Closer to home, Cedar Rapids, Ia estimates the need to fix 100,000 potholes. So far the city has used over 120 tons of fill material. Paid for by local option sales tax, the city has purchased three new pothole mix spreaders for around $65,000 each and upgraded to a longer lasting premium mix—20% more expensive.


Still other communities are calling on volunteers to fill holes quickly with cold mix until permanent road patches can be made in April.

Better Quality vs Throw-and-Roll Methods:

“If a few simple and cost-effective measures are applied with each repair then there may be less need for as many repeat repairs and savings could be in the millions annually.”
— Mujib Rahman, co-author, Nottingham Trent University study, England.


The study found that applying a coat of bitumen emulsion between two layers of asphalt significantly improved its resistance to further cracks and confirmed a hot mix repair — in which the asphalt was heated to 284 degrees or higher — was the best option for fixing holes 1 inch and deeper.

Potholes Cause Property Damage:

TRIP, a nonprofit organization that researches surface transportation issues, estimated an average urban driver pays out $377 a year in repairs — or a total of $80 billion nationwide, with many flat tires caused by potholes. (based on 2013 data)

Keeping the Good Pavements Good:

Trying to put this all into perspective Larry Galehouse gives this statement, “Americans pay about $21 a month on average in state and federal road taxes — a fraction of what they pay for cable television or a cell phone. And yet what is one of our most (personal) expensive investments out there? It's our automobile. And we're wrecking our automobiles because we're hitting potholes ... The key is not fixing them. The key is preventing them."

Wouldn’t it make more sense to spend a dollar to preserve newer pavements, keeping them like new longer, rather than spending $10.80 to patch, repair and replace?

Sunday, February 9, 2014

New Branch Office Opens Near Chicago

Thanks to all our clients who are enjoying the benefits and overall cost-savings by preserving their asphalt pavements with us!

Now, just in time for the 2014 working season, we proudly announce the opening of our Chicagoland branch office in Somonauk, IL.

At our new branch office, you can expect the same great Gee quality, pride, and service you have come to expect from us...just now a little closer to you!

Sunday, January 5, 2014

Top New Years Resolutions for Pavement Maintenance

“GSB-88® Sealer Binder cost about 8x less than the cost of applying new asphalt.”
--Matt Hawks, General Manager, White Cloud Casino

“Thank-you for introducing us to a cost-effective and efficient product (GSB-88®)! All airfield users agree it is a great improvement rejuvenating a deteriorated taxiway into an almost new system.”

--Shaun Germolus, Director of Operations, Duluth International Airport

"Analysis shows GSB-88® yields a Savings-To-Investment Ratio (SIR) Of 5.0 and a Return On Investment (ROI) of 400%."

--GSB-88 NAVFAC Performance Report

“$1 spent today on pavement preservation reduces future replacement costs up to $10.80”

– Jim Sorensen, Director Pavement Preservation, FHWA
“Our parking lot was showing signs of deterioration. We needed to improve the appearance and safety. Replacement with new asphalt was going to be costly. We could replace it OR, preserve it by sealing the cracks and applying GSB®. We agreed to have Gee Asphalt Systems provide the pavement preservation services...and are very pleased.

--Matt Hawks, General Manager, White Cloud Casino



“GSB-88® is engineered to significantly retard surface oxidation by rebinding the surface aggregate and protect the pavement binder from the natural surface oxidation process. Surface oxidation is far and away the greatest deteriorating factor on the majority of DOD airfields.”

--DOD Comprehensive Evaluation of GSB-88® Sealer Binder

Thank you for your assistance in providing a solution to our problem...The untreated test section showed extreme raveling with excessive loose aggregate and a very porous surface. The subsequent test application of GSB® has corrected this problem and has no doubt prolonged the life of this surface. It is evident the surface would have to have been replaced if not for the GSB® application.”
--Tom McCarthy, Operations Manager, Northpark Mall



“We are very satisfied with GSB® and over the years of wear and tear it has held up tremendously well. We have used other products over the years but they do not compare to the quality of the GSB® application.”

--Eugene Oakey, Director of Facilities, May Centers, Inc.



“Gee Asphalt showed me pavements where GSB® had been used from as little as 1 year ago, up to pavements maintained as long as 32 years, and they all looked amazing!”

--Brent Stansbury, Facility Engineer, Gateway, Inc.



“We wanted to try something besides the ss1h asphalt emulsions to keep aggregates bound in place on the shoulders, prevent raveling, and keep newly placed asphalt in a "like new" condition. We tried GSB-88®. Years later aggregates were still bound tightly in place...GSB-88® was applied to asphalt overlay projects having ADT (average daily traffic) ranging from 300-2600 vehicles. We will continue using GSB-88® for our asphalt preservation applications.”

--Allen Horak, District Maintenance Superintendent, Nebraska Department of Roads

 “I can’t say enough about Gee Asphalt, their professionalism, polite and courteous staff and customer satisfaction. They talk the talk and walk the walk! You continue to be a true pleasure to work with. Gee Asphalt has become an awesome partner in Asphalt Preservation!" 

--Scott Mallicoat, District Maintenance Supervisor, Farmington Schools

Gee got the job done right!...Working with a company that gets the job done right the first time with little supervision is great! I look forward to working with Gee Asphalt in the future.”


--Les Lawson, Iowa State University, Facilities Planning & Management Campus Services

“From the salesperson to receptionist, owner to crew, these top-notch professionals exceeded our expectations with their fast and efficient, high quality work. Knowledgeable and courteous describes their staff and crew. I would highly recommend them.”


--Ms. Angie Ellison, Engineering Technician, City of Eagan Minnesota

“Everyone at Gee Asphalt Systems, from the owner to office staff to field crews, are professional and act with integrity.  They understand our shopping center clients and work diligently to minimize customer inconvenience."


--Thomas R. Zimmer, PE, Principal, Zimmer Consultants, Ltd

Make Gee part of your New Year's Resolution and improve the health of your pavements today!
 





Thursday, October 3, 2013

Is your runway maintenance strategy costing you money?

Here’s 2 scenarios with cost estimates. Which scenario can you relate to the most?


Scenario 1
8 yrs after runway installation, some raveling is noticeable and identified as a potential safety hazard. Budget for a a full mill down and overlay resurfacing project and make shut down preparations for at least a month. Afterwards, for a time, runway operates well. However, in 5-8 yrs raveling detected again. Again, budget for a resurfacing project and shut down for repairs.



Cost (2 resurfacing projects) = 6 million dollars.

+ Cost of runway shut down for 30+ days, 2x in a 25 yr life-cycle = ???


In 3-5 yrs more, notice structural integrity failure. Budget for complete tear out and reconstruction.




Scenario 2

In 5-8 yrs after runway installation (sooner for best results), seal with GSB-88 (Gilsonite Sealer Binder) before raveling is detected and close runway for 2 days. Runway is preserved in Good Condition. Plan to seal coat with GSB-88 every 5 yrs during a 25 yr life-cycle and keep runway in Good Condition for years longer than typical processes.

Cost (seal with GSB-88 every 5 yrs in a 25+ yr life-cycle) = $1.5 million

+ Cost of closing down runway for 2 days once every 5 yrs.


How can GSB-88 perform better than other processes?

Extensive research has validated: Unlike other processes that stick on the asphalt’s surface, GSB-88 will never crack, peel or delaminate. Because of it’s unique chemical properties, GSB-88 penetrates down into the matrix, becomes part of the surface, and forms a tight seal. In combination, the aging process is halted while pavement flexibility is preserved and load carrying ability is significantly extended.

The choice is yours!
Plan to spend some to preserve runway surfaces in Good Condition every 5 years OR spend 3x as much on resurfacing projects with lengthy closures!

Monday, August 12, 2013

Want to reduce maintenance costs up to 60%?

FHWA data states that $1 spent on Preservation reduces future replacement costs up to $10.80!

Known fact: A road is installed with a life-cycle. Often a decade passes and little is done to access its health. But soon, defects become unavoidable. Once the damage is visible, the binder remains unprotected and exposed. If left unchecked, it will continue to deteriorate at an alarming rate. At this stage, to stall further deterioration, temporary fixes often are applied--but they don’t improve the health and strength of the binder crucial to pavement longevity. Damage will continue to progress through the structure--and your road, now in Poor Condition will land at the top of your Reconstruction List.

There is a better way. Combat future reconstruction costs at the source--Plan to spend a little of your budget now and preserve Good Condition pavements in Good condition with GSB.


GSB is not your average coating. It is asphalt cement that not only penetrates down into the matrix but also moves at the same rate as asphalt pavement. Unlike surface coatings, GSB’s unique chemical makeup locks in vital oils and pavement flexibility. The result--pavements are preserved in Good Condition normally 2x as long as other processes!

GSB Works! We have pavements that have been on a strategic preservation program for 40+ years!




Call us today and let us show you how you can significantly reduce your maintenance costs with your own Strategic Preservation Program!

Saturday, July 13, 2013

What's Wrong with Worst-First Maintenance?

“We’ve always done it this way.”

It’s a familiar statement that approves the Worst-First maintenance strategy again for the next fiscal year. Yet the same decision-makers would agree the same statement is a business killer even among multi-million dollar companies revealing a lack in vision to meet consumer demands.


And the demands on our roadways are increasing. DOT and FHWA data state since 1960, roughly 3.69 million registered vehicles are added each year, with a 8 million jump in 2000-2001. In 2007, the passenger vehicle count was 254.4 million. Can the same road maintenance strategy used since the 1960’s or earlier really meet the current increasing demand?

U.S. roads are estimated as an 80 trillion dollar asset or 7 billion per day. As the number of vehicles on U.S. roads increase, the need for more roads kept in Good Condition increases, while reconstruction costs are also on the rise. So the way “we’ve always done it” Worst-First strategy–fix it, fix it, fix it, then reconstruct–does not protect your asset and is wasting more of your budget than you think. 



Take a Pro-active approach to pavement maintenance! Get ahead of the breakdown cycle and bypass the expensive temporary fixes and reconstruction costs. Our Solution: Preserve Good Condition pavements with Gilsonite Sealer Binder (GSB). GSB Sealer Binder out performs every other asphalt emulsion (polymer modified too) in wet track abrasion tests, increased permeability, reduced viscosity, and reduction of oxidation processes--and keeps asphalt pavement performing like new for many years–normally 2x as long as other processes. Gee Asphalt has pavements that have been on a continuous preservation program for 39 years and counting!

GSB, as part of a proactive preservation program, has been proven to reduce pavement maintenance costs by up to 60%!

Gee Asphalt offers the following services in Preservation/Preventative Maintenance:

Gilsonite Sealer Binder (GSB)
Crack Sealing
Slurry Mac



Let us show you how your maintenance strategy can become more effective save you money!

Monday, June 3, 2013

Quality Crack Sealing

Once pavement has hardened allowing moisture to enter the base and support structure of your pavement, the rate of deterioration and damage and cost to repair will accelerate significantly unless you act quickly.


Choosing quality sealant materials and installing them correctly is critical to the long-term performance of any crack seal and is best handled by experts with knowledge, skill and the right equipment to do the job right. You can risk hiring cheaper contractors but if they are not specifically trained in crack sealing, you will have to repeat the process again sooner, wasting your valuable time and money.


Here at Gee, our expertly trained technicians only install products we are 100% confident in and meet our high standards; crack sealant must bond well to crack walls, be elastic enough to stretch without tearing apart in cold temperatures, and not track when temps go up to 100 degrees or more. Crafco, W.R. Meadows, and Maxwell hot applied crack sealants meet ASTM 3405 standards and our high performance expectations.

Proper Technique is Key! Successful crack sealing requires that all cracks are properly prepared; cleaned (using oil-free compressed air) and completely dry. Only then is sealant poured into the crack, filling from the bottom up until sealant is flush with the surface – to prevent voids or bubbles that can shorten the life-cycle of the crack sealing process while also preventing most damage from traffic, plows and pedestrians.

 Hot applied sealants are recommended for the majority of our clients because they prove most cost-effective and last years longer. Hot pour sealants are melted down on your job site in a specialized double jacketed melter applicator. We also install single and double component cold applied crack sealants during fringe season or southern climates.

Don’t risk further damage to your investment!
Using skilled technicians and proper techniques is key to every successful crack sealing project. Call us today for a free consultation and cost estimate!

Monday, May 6, 2013

Change the Way You Think About Pavement Maintenance!

There is a vicious spending cycle that is eating away at our county and city budgets. The “Worst First” maintenance strategy allocates budget dollars for rehabilitation of the very worst pavements, leaving little or no money left to spend on maintaining Good condition pavements. 


Change the Way You Think About Pavement Maintenance!
While preventing oxidation of the asphalt binder is a "first priority" and is critical to pavement longevity, once the binder is exposed, if neglected, Good condition pavements quickly deteriorate and will end up at the top your reconstruction list sooner than you think!

There is a better strategy! Bypass the expensive cycle of temporary fixes and reconstruction costs by preserving Good condition pavements with Gilsonite Sealer Binder (GSB). GSB Sealer Binder out performs every other asphalt emulsion (polymer modified too) in wet track abrasion tests, increased permeability, reduced viscosity, and reduction of oxidation processes--and keeps asphalt pavement performing like new for many years–normally twice as long as other processes.

GSB, as part of a proactive preservation program, has been proven to reduce pavement maintenance costs by up to 60%!

Changing the way you think about maintaining your network of pavements requires planning, perseverance and getting the whole organization up to speed on the benefits of preservation, all the way from the field and operations people, up to the top management and ownership. This can be a challenge, especially when the system has always been run "this way." But, if the experts are in agreement about the benefits and budget-savings, isn’t it about time to reevaluate how your organization thinks about preservation and your pavement maintenance strategy?

Friday, April 19, 2013

Think Pavement Preservation is a waste of money? (Our customers don’t)

Learn from more of our clients at http://www.geeasphalt.com/#!references/cc5g


Estimates from the National Center for Pavement Preservation state that for every $1 spent on Asphalt Preservation, up to $10.80 is realized in reduced replacement costs.


Pavement Preservation is "a program employing a network level, long-term strategy that enhances pavement performance by using an integrated, cost-effective set of practices that extend pavement life, improve safety and meet motorist expectations." 
    -- FHWA Pavement Preservation Expert Task Group

"Times have changed and we cannot afford to follow the old methodology of build it and forget it. Instead, we need to preserve our existing infrastructure investments well into the future. Projects that preserve the existing pavement are good investments from a public policy perspective."
   -- Larry Galehouse, Director, National Center for Pavement Preservation


Let Gee Asphalt Systems, Inc. teach you what our customers already know: how to extend the life of your valuable asset and save you money!

Friday, February 1, 2013

GSB-88 Receives the Nation's First Environmental Product Declaration!


To truly measure a products impact on the environment you must measure all the elements that go into it from cradle to grave.
GSB-88 was recently submitted to a rigorous and complete Life Cycle Assessment (LCA) conducted in accordance with the International Organization for Standardization (ISO) guidelines and qualifications which examines products to determine if they are truly green. With high scores in every category, GSB-88 received the ultimate reward, an Environmental Product Declaration (EPD). No other asphalt product or seal coat of any kind has ever been subjected to this intense and comprehensive process!

Instead of casually calling a product "Green", this academically rigorous, internationally accepted evaluation process includes all three phases of a product life cycle.


The three phases include the environmental impact measured by eight evaluation criteria being applied to: 

1) each component of the product,
2) the actual use of the product, and
3) the eventual recycling of the product.

If GSB-88 was utilized on a global scale it could save 1.2 million metric tons of CO2 emissions per year and billions of dollars in savings.